Heat-Resistant Fiberglass Cloth
* Tadpole gasket covering * Flange gasketing
* Oven door seals * Pipe wrapping/insulation
PLAIN. AGIS plain fiberglass cloth is a tightly woven cloth manufactured from texturized fiberglass yarn; it contains no compound, cement or wire. Selvaged edge will not fray or unravel. Meets U.S. Coast Guard requirements for incombustible material. Used in service conditions characterized by temperatures to 1000 F. Retains as much as 25 % of its tensile strength at 1000 F. Will not swell, stretch, shrink or change chemically during prolonged exposure to water.
Premium Grade. Densely woven cloth features surface-applied heat treatment, which renders the cloth free from most surface grit associated with fiberglass and allows for superior manufacturing capabilities.
Applications: Tadpole gasket covering, flange gasketing, oven door seals, pipe wrapping and insulation
Commercial Grade. Looser weave than premium grade cloth; not heat treated.
Applications: Flange gasketing, oven door seals, pipe wrapping and insulation Used where economy in pricing is a necessity.
RUBBERIZED. AGIS rubberized fiberglass cloth is a thick tightly woven fiberglass base cloth with a unique SBR rubber coating. The coating allows the rubber to seep into imperfections in the sealing surfaces and, when hardened, creates an airtight seal. Suitable in service conditions where temperatures and pressure do not exceed 380 F and 180 PSI respectively. May be manufactured to virtually any thickness and length by layering the 1/16" thick plies of material and then calendering them.
Options: Available with brass wire insert when greater tensile strength is required.
VERMICULITE COATED This is a plain, tightly woven cloth manufactured from texturized fiberglass yarn, coated with a special vermiculite compound and dyed blue. Meets U.S. Coast Guard requirements for incombustible material. Used in service conditions characterized by temperatures to 1800 F. Will not swell, stretch, shrink or change chemically during prolonged exposure to water. Because of the vermiculite coating, the tensile strength and chemical resistance are greatly enhanced over plain fiberglass cloth.
Applications: Ideal for applications where severe abrasion and chemical attack render plain fiberglass unacceptable.
Home | A Short Introduction | Our Products | Our Services | TOPOG-E® Boiler Gaskets | What's New at AGIS? | Request for Information/Quote
Poplar Street, Ambler, PA 19002