PTFE Joint Sealant Tape

 

  Expanded PTFE Joint Sealant Tape

 

         Compressible gaskets    Form-in-place gaskets

            Conforms to any surface       Withstands temps -450 to 600F

           

AGIS, LLC now offers a compressible form-in-place expanded PTFE joint sealant tape, which conforms to almost any sealing surface.  

The joint sealing tape, manufactured of 100% pure expanded PTFE, is a soft compressible form-in-place gasket material that conforms to any surface, including rough, pitted, scratched and damaged surfaces. Among the possible applications are any accessible bolted joint that feature a flat or serrated sealing surface, such as round, oval, rectangular, complex and irregular flanges; raised face and flat face flanges; metal, plastic and glass-filled flanges. Ideal as joint sealant/sealing gasket for pump and compressor housing flanges; boiler and pressure vessel manholes and handholes,  heat exchangers, miscellaneous lids, access plates and ducts, among other sealing applications.  

Upon compression the expanded PTFE joint sealant tape forms a thin, hard ribbon that fills in surface irregularities and creates an extremely tight seal.  The expanded PTFE gasket tape is capable of withstanding a wider range of pressures, temperatures and chemical environments than any other soft gasket.

AGIS's form in place gasket sealant tape performs under variable service conditions temperatures from -450° to 600°F and pressures from F.V. to 3000 psi. 

Other features of the expanded PTFE joint sealing gasketing tape include:  · FDA compliant  · Easy installation & removal  · Chemical resistant   · Same chemical inertness of pure virgin PTFE; no fillers or binders · Adhesive strip and peel-off backing for easy installation on both horizontal and vertical surfaces · Unlimited shelf life: no age deterioration · Resists creep and cold flow

AGIS's PTFE expanded joint sealant tape is available on spools in sizes ranging from 1/8" to 1" width and 15' to 150' lengths. Ask your AGIS customer service representative about custom sizes and shapes..   

For information, prices or samples, contact AGIS, LLC, 16 Poplar St., Ambler PA 19002.  PH:  215-646-8010 1-800-842-8040; FAX: 215-646-8013; E-MAIL: sales@agismfg.com; Web: www.agismfg.com   

About AGIS, LLC

AGIS, LLC  is both a manufacturer and a distributor of mechanical packing, gaskets, tapes, ropes, cloth and other high temperature specialty products for marine and industrial applications.  

AGIS sealants are used in virtually every industry throughout the world, including chemical processing, petroleum, waste/water treatment, steel & mining, food processing, boiler, steam, plant maintenance, power generation, metals/heat treating, transportation and marine, pulp & paper manufacturing, to name a few.

Among the recommended uses for AGIS sealants are: general service, brine, cold water, cold oil, high-pressure rams and accumulators and high-speed shafts, gasoline, oil, asphalt, steam, air, alkalines, solvents, gases, ammonia, mild acids, phosphate esters, hot and cold water, solvents and air, alkalis, pump packing in mining service, dryers, blenders, cookers and mixers, sewage treatment, granular and abrasive service, slurry pumps, sludge pumps, dredge pumps, extruders and mud pumps 

Because service conditions vary widely, AGIS sealants are manufactured in many forms, such as gaskets, rope, tape and mechanical packing, and in a wide range of materials, including natural fiber, rubber, compressed fiber, fiberglass, ceramics fiber, graphite, Teflon, metal, Kevlar, carbon-Inconel and GFO, among others. Within our huge inventory are sealants capable of withstanding extremes of temperature, pressure or corrosive attack present in even the harshest service environment.

 

Click here for a complete list of our sealing products

Click here to request information or a price quote

   Home | A Short Introduction | Our Products | Our Services | TOPOG-E® Boiler Gaskets | What's New at AGIS? | Request for Information/Quote

16 Poplar Street, Ambler, PA 19002
Phone:215-646-8010   Fax:215-646-8013
E-mail:
sales@agismfg.com